With a wiresheet open, disconnecting first unsubscribed its components and
waited for the reply, which a restarting device never sends, so the editor
froze until the request timed out. After restart, reboot, quit or hibernate
the session is now closed without asking the device anything; a plain
Disconnect still unsubscribes first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The device goes down without answering, so the editor waited out the 30 s
Sox timeout before dropping the session. The invoke now waits 3 s (time for
DASP to resend it once) and the editor disconnects either way; an error
reply from the device is still reported and keeps the connection. Covers the
App right-click actions and the restart Put with Files offers.
- sox: request/requests/invoke take a timeout
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A kits step after the zip is chosen, laid out as the Manage Kits panel:
installed kits (what the app needs, greyed), installed but not used, kits
available on the computer, not supported; the Action cell offers Keep at /
Upgrade to / Downgrade to / Add at / REMOVE; Upgrade all kits to latest
version. Kits not in the backup can be added, with their dependencies.
The ticked kits make app.sab's schema (encode_sax takes the kit list, as
Ontrol's PutApp rewrites it). When they are not the device's kits, or
Rebuild kits.scode is ticked, kits.scode is built for them with Ontrol's
sedonac from the Niagara install, after checking the natives the kits call
against the device's platform manifest (PutApp.checkNativeCompatibility).
- kit_build.py: platform manifest lookup, native check, sedonac run
- palette.kit_versions: a checksum released more than once stands for its
highest version (ontrolPlatform 1.0.1, not 1.0.0)
- palette.unsupported_kits takes the kit list to judge against
- sab_app: a type from a kit the app does not list is a clear error
Tested on a P-ION: a rebuild for its own kits is byte-identical to the one
it runs; adding and then removing the logic kit both come back running.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-click a component (or the app) with two or more children to move them
up and down; OK applies the new order, which is the order they run in. On a
device the order goes there first via Sox reorder, checked against the
device's children, and the file is left alone if it is refused. Undoable.
Also: device host in editor.properties.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Follows Ontrol's Workbench tool (BPutWithFilesTool / PutApp): the backup's
app.sax is encoded for the device's kits and put as app.sab.writing, renamed
to app.sab.stage; the platform service's deleteFile clears fonts/* and
images/*, then images, fonts (from Sedona home's bank, in the device's cut)
and the boot logo go. The zip is checked against the device first: same
platform (Orion, Rion or P-ION, from the platform id), and kits the device
can load. Falls back to the backup's app.sab, with its kits.scode if needed.
- sab_app.encode_sax: .sax -> .sab, ported from Py_sab2sax with Java's value
parsing (fromLiteral, nullbool/nullfloat, Integer.decode); byte-identical
to sedonac on the saved backups
- app_backup.native_image: port of OntOxImageUtil's png -> native .bin
- sox.put_file / rename_file
- Get with Files: Orion's boot logo is system/logo.jpg
- A restart that goes unanswered is taken as the device going down
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+click toggles a link in the selection; Del or the link popup deletes
every selected link after one confirmation, as a single undoable step.
On a device, links the device refuses stay and are named in one warning.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening a sheet on a device rebuilds the DOM, so every element is new and
the history, which matched by identity, pruned each sheet as soon as it was
recorded. On a device entries now match by id, and Back reopens a view on
the current element rather than the snapshot it was recorded with.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ctrl+click picks out several boxes on the sheet, and Ctrl/Shift+click several
rows in the tree. Copies are named on from their original (Add1 -> Add2), sit
one step right and down, and keep the links that ran between the copied
components. One undo step; on a device the originals are read back in full
and the copies made there.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A palette drag dropped on a tree row adds the component inside that row's
component, placed under its lowest child. The row under the pointer is
highlighted, and resting on a collapsed branch opens it, loading it from
the device when live without moving the selection or the open sheet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The chosen kit is remembered in editor.properties [Palette]; a file without it
opens on its first kit. Saving preferences now keeps the other sections.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Redo is gone in both file and device mode: the Edit menu entry, Ctrl/Cmd+Y
and Ctrl/Cmd+Shift+Z, and the redo stack. An undone step is dropped.
Undoing past the last save now leaves the saved depth unreachable, so a
new edit cannot be mistaken for the saved state.
Renames on a device are undoable: LiveRenameCommand renames back on the
device first, and warns and clears history if the device refuses.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Right-clicking a tree row selects it, and on a device that reopens the
sheet and rebuilds the DOM after the popup captured the row's element.
Delete then ran on a stale element: the device delete went through but
no undo step was recorded. Popup actions now look the component up by
id when they run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Undo and redo now work against a connected device; each step is sent
there through Sox. Deleting a component first reads its whole subtree
back (config, unloaded children, links, place among siblings) so undo
can recreate it; recreated components take new device ids, which the
DOM elements pick up so later steps still reach them. Binary Buf
config (a user's cred) is read with read_prop, since the cache decodes
every Buf as a Str. Moves, tidy layout, and Properties / page editor /
user edits record only what the device accepted.
A step that does not fully reach the device warns and clears the
history. History is also cleared on every view change in live mode,
as opening a sheet rebuilds the DOM from the device.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rebuilding the tree (live child loads, edits) now restores every row that
was expanded, matched by component id or name path. Double-click no longer
toggles a row through ttk's default binding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A real P-ION (fw 1.32) restarted on every Sox file get. Ontrol's Niagara 4
driver gets app.sab from the same device, so its settings are copied:
- DASP hello asks for 256-byte packets (idealMax/absMax), so file chunks
are 238 bytes
- the message-length header (0x81) goes to Orion only, decided once the
platform id is read
- the app is saved on the device before app.sab is read, the save resent
every 5 s rather than 1 s (a P-ION save takes 2-3+ s)
- the file open is resent every 15 s; DASP gains a per-packet resend
interval for this
Tested on a P-ION at 192.168.1.252: save 3.2 s, app.sab + kits.scode +
app.sax in 15.8 s, no resends, device stayed up. The unsaved-changes
question became a notice, since the app is now always saved first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reads app.sab and kits.scode over Sox file transfer, decodes app.sab to
app.sax (byte-identical to sedonac), and on Orion/Rion also fetches the
images and fonts the app names, with their sources from Sedona home's
banks. Offers to save the app on the device first when it is dirty, and
asks where to save with <Sedona home>/store/apps and
app-<device>-<app>-<timestamp>.zip filled in.
DASP trace lines are now printed by their own thread: printing from the
network threads to an unread stdout pipe blocked the receiver and made
file transfers time out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Connect and Discover stay enabled while a device is connected. Pressing
Connect in the dialog drops the current device before the new one is
tried; cancelling the dialog leaves the connection alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening a file now drops the live connection once a file is chosen, without
asking. File > Exit and the window close box go through quit_app, which
closes the Sox session properly instead of leaving it for the device to
time out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hovering a slot row highlights the half under the pointer and shows a
direction cursor. Pressing on a slot drags a rubber band; dropping on
another slot links them, dropping on a title bar opens the Link dialog
with the dragged slot preselected, and a no-entry cursor marks a slot
that would refuse the link. A right click that never moves still opens
the context menu.
The palette now leaves out types whose facets carry @palette=false, and
kits with nothing placeable left.
Also points the default device host at 192.168.1.251.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rename is offered from both the canvas and the navigation tree. Names are
checked against Sedona's Component.checkName rules (1-7 ASCII chars, a
letter first, then letters, digits or '_') and must be unique among
siblings. In file mode link paths through the old name are rewritten and
the rename is one undo step; in live mode it goes to the device via Sox
and warns if the device rejects it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In live mode the device is now written first and the document only takes
what the device accepted. Every live_hooks failure records a reason, and
warn_failure() shows it in a dialog and the status bar instead of failing
silently.
- Move, properties, OX page editor: rejected values are rolled back and listed
- Add/remove link: no longer edits the DOM alone when an end can't be resolved
- Add/delete component: report why the device refused
- Tidy Layout: sends each new position to the device, reverts refusals,
marks the document dirty, and pushes no undo step in live mode
- User Manager: add (one Sox add carrying cred/perm/prov), edit and delete
now go to the device
- Binary Buf slots (e.g. User.cred) are sent as Buf bytes, not as Str text
- Bump version to 0.0.0.136
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root tree row now names the app component, "app (<host:port>)" or
"app (<file>)", and offers Properties from its context menu and on
double-click. The live DOM's <app> element now carries its type and slot
values, and the refresh-by-id lookup finds it, so the view shows real
sys::App values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit mode, snap to grid and the widgets/properties pane are now toggles on
the main toolbar while the Page Editor is open. Outside edit mode the page
and the property sheet are read-only; drags snap to the 10px grid when
snapping is on. The default window grows by the right pane's width so the
canvas is not squeezed when the pane shows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Toolbar zoom buttons (in/out/reset/fit) and Ctrl+MouseWheel now
control the page editor canvas when it is active. Frame image is
scaled via PIL for smooth rendering at any zoom level.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New ox_page_view.py with OxPageViewPanel: canvas rendering at device
resolution (800x480 Orion, 320x240 Rion), RGB565 color conversion,
widget tree, selection handles, drag-move, device frame image support.
Wired into main.py with context menu, history, panel lifecycle.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Permissions dialog now uses two-level UI: compact Edit User with >> buttons
opening a separate grid dialog (Groups x Operator/Admin columns) with
Clear All / Set All and auto-cascade (write implies read, admin implies operator)
- Provisioning has its own >> popup dialog
- Removed live mode restrictions for add/edit/delete user operations
- Broadened type detection and added safe int conversion for live mode values
- Double-click on tree node or canvas box opens special view (User Manager for
UserService, Properties for other components)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New user_service_view.py with table of sys::User children, add/edit/delete
dialogs, SHA-1 credential hashing, 32-bit permission bitmask (4 groups x 7
flags), 8-bit provisioning byte, and undo support. Wired into main.py with
context menu entry, panel management, history navigation, and live-mode DOM
resolution for correct display on connected devices.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Populate prop elements with manifest default values when adding
components in both offline and live mode
- Send config values from manifest in SOX add command for live devices
- Refresh button in properties panel now fetches fresh values from
the connected device before re-reading the DOM
- Properties panel fetches device values on open in live mode
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix add component from palette in live mode: resolve <app> element
as comp_id 0, fix type_id lookup to use type_name_map, set type_name
on newly added SoxComponent, sync device values into DOM after add,
write meta position back to device, and subscribe new component to COV.
Fix delete component in live mode: clean up subscriptions for deleted
component and all its descendants.
Add tree root context menu with device app actions (save, hibernate,
quit, restart, reboot) in live mode. Device save clears dirty state.
Clean up connection lost handling to do a full disconnect.
Fix slot registry to copy base slots and renumber IDs correctly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Discover dialog shows a device list with Port, Wait Time fields and a
Discover button. Selecting a device and clicking Connect (or double-
clicking) opens a credentials prompt for username/password, then
connects. The Connect dialog is reverted to its original simple form.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
In live mode the DOM is rebuilt from the device when switching sheets,
creating new element objects. The pending link from the old tree could
not be found by identity in canvas_link_map. Re-resolve it by from/to
attributes after the rebuild so the selection matches.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
_slot_name_by_id() now resolves SOX link slot IDs against the
inheritance-flattened final_components_registry instead of the
per-type slot_registry whose local IDs were wrong for types with
intermediate parents (e.g. RegFloat→Register→Component). This
produced incorrect link endpoints, inflated linked-slot visibility,
and different box sizes between file and live modes.
Also: tighten routing constants for denser wiring, add wiresheet
PNG print/export (Ctrl+P), sort link routing jobs by gap distance,
remove debug route logging, and fix live tree-expand re-selection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Opening a file while connected to a device prompts to disconnect first.
Connecting to a device while a file is open prompts to save unsaved
changes, then closes the file before showing the connect dialog.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add type_name_map on SoxClient so components loaded after connect
resolve proper names (e.g. control::And2) instead of kit::typeN.
This lets the slot registry and final_components_registry match,
so component boxes show their slots and property values.
- Load live schema gracefully: skip missing kit manifests instead of
aborting, compile the kits we have, and warn about missing ones in
the status bar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
_on_tree_open used tree.selection() which may differ from the opened
node; switched to tree.focus(). Network calls in _live_tree_expand now
run in a daemon thread so the UI stays responsive during lazy loading.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
After open_wiresheet rebuilds the DOM and tree, re-find the target
element by its comp id (not the old tree item ID which no longer
exists) and re-select it with the restoring flag to prevent recursion.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use RLock instead of Lock for _close_lock so close() can call
_shutdown() without deadlocking — previously the session never
marked itself closed, causing infinite keepalive sends.
Mask kit checksums to unsigned 32-bit for hex display so negative
i4 values render as proper 8-digit hex (e.g. d3984c51 not -2c67b3af).
Tested against live device at 192.168.1.251 — full handshake,
schema read, and component tree load confirmed working.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New checkbox in Preferences (default off). When enabled, every DASP
send (>>>) and receive (<<<) prints message type, seq/ack numbers,
payload size, and remote address to stdout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Guard tree.get_children() with tree.exists() so a stale item ID from
a COV or lazy-load rebuild does not raise TclError.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Port the DASP transport and Sox protocol stack from sedonaOntrol Java
to Python, enabling live device editing alongside the existing offline
SAX editor. Lazy-loads components on navigation, caches them, and
subscribes to COV events for the active wiresheet.
New files: dasp.py, sox.py, device_session.py, connect_dialog.py,
live_hooks.py. Modified: app_state.py (live-mode state), main.py
(Device menu, COV polling, lazy tree expand), properties.py (Sox
write-through), sax_file.py (structural mutations route through
live_hooks), schema.py (find_manifest helper).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When a SAX file is opened and any declared kit is missing a checksum,
the Kit Manager panel opens automatically and the palette stays empty
until the checksums are resolved.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
ArdaandClaude Opus 5.5