Undo and redo now work against a connected device; each step is sent
there through Sox. Deleting a component first reads its whole subtree
back (config, unloaded children, links, place among siblings) so undo
can recreate it; recreated components take new device ids, which the
DOM elements pick up so later steps still reach them. Binary Buf
config (a user's cred) is read with read_prop, since the cache decodes
every Buf as a Str. Moves, tidy layout, and Properties / page editor /
user edits record only what the device accepted.
A step that does not fully reach the device warns and clears the
history. History is also cleared on every view change in live mode,
as opening a sheet rebuilds the DOM from the device.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rebuilding the tree (live child loads, edits) now restores every row that
was expanded, matched by component id or name path. Double-click no longer
toggles a row through ttk's default binding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A real P-ION (fw 1.32) restarted on every Sox file get. Ontrol's Niagara 4
driver gets app.sab from the same device, so its settings are copied:
- DASP hello asks for 256-byte packets (idealMax/absMax), so file chunks
are 238 bytes
- the message-length header (0x81) goes to Orion only, decided once the
platform id is read
- the app is saved on the device before app.sab is read, the save resent
every 5 s rather than 1 s (a P-ION save takes 2-3+ s)
- the file open is resent every 15 s; DASP gains a per-packet resend
interval for this
Tested on a P-ION at 192.168.1.252: save 3.2 s, app.sab + kits.scode +
app.sax in 15.8 s, no resends, device stayed up. The unsaved-changes
question became a notice, since the app is now always saved first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reads app.sab and kits.scode over Sox file transfer, decodes app.sab to
app.sax (byte-identical to sedonac), and on Orion/Rion also fetches the
images and fonts the app names, with their sources from Sedona home's
banks. Offers to save the app on the device first when it is dirty, and
asks where to save with <Sedona home>/store/apps and
app-<device>-<app>-<timestamp>.zip filled in.
DASP trace lines are now printed by their own thread: printing from the
network threads to an unread stdout pipe blocked the receiver and made
file transfers time out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Connect and Discover stay enabled while a device is connected. Pressing
Connect in the dialog drops the current device before the new one is
tried; cancelling the dialog leaves the connection alone.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Opening a file now drops the live connection once a file is chosen, without
asking. File > Exit and the window close box go through quit_app, which
closes the Sox session properly instead of leaving it for the device to
time out.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hovering a slot row highlights the half under the pointer and shows a
direction cursor. Pressing on a slot drags a rubber band; dropping on
another slot links them, dropping on a title bar opens the Link dialog
with the dragged slot preselected, and a no-entry cursor marks a slot
that would refuse the link. A right click that never moves still opens
the context menu.
The palette now leaves out types whose facets carry @palette=false, and
kits with nothing placeable left.
Also points the default device host at 192.168.1.251.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Rename is offered from both the canvas and the navigation tree. Names are
checked against Sedona's Component.checkName rules (1-7 ASCII chars, a
letter first, then letters, digits or '_') and must be unique among
siblings. In file mode link paths through the old name are rewritten and
the rename is one undo step; in live mode it goes to the device via Sox
and warns if the device rejects it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In live mode the device is now written first and the document only takes
what the device accepted. Every live_hooks failure records a reason, and
warn_failure() shows it in a dialog and the status bar instead of failing
silently.
- Move, properties, OX page editor: rejected values are rolled back and listed
- Add/remove link: no longer edits the DOM alone when an end can't be resolved
- Add/delete component: report why the device refused
- Tidy Layout: sends each new position to the device, reverts refusals,
marks the document dirty, and pushes no undo step in live mode
- User Manager: add (one Sox add carrying cred/perm/prov), edit and delete
now go to the device
- Binary Buf slots (e.g. User.cred) are sent as Buf bytes, not as Str text
- Bump version to 0.0.0.136
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The root tree row now names the app component, "app (<host:port>)" or
"app (<file>)", and offers Properties from its context menu and on
double-click. The live DOM's <app> element now carries its type and slot
values, and the refresh-by-id lookup finds it, so the view shows real
sys::App values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Edit mode, snap to grid and the widgets/properties pane are now toggles on
the main toolbar while the Page Editor is open. Outside edit mode the page
and the property sheet are read-only; drags snap to the 10px grid when
snapping is on. The default window grows by the right pane's width so the
canvas is not squeezed when the pane shows.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Toolbar zoom buttons (in/out/reset/fit) and Ctrl+MouseWheel now
control the page editor canvas when it is active. Frame image is
scaled via PIL for smooth rendering at any zoom level.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New ox_page_view.py with OxPageViewPanel: canvas rendering at device
resolution (800x480 Orion, 320x240 Rion), RGB565 color conversion,
widget tree, selection handles, drag-move, device frame image support.
Wired into main.py with context menu, history, panel lifecycle.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Permissions dialog now uses two-level UI: compact Edit User with >> buttons
opening a separate grid dialog (Groups x Operator/Admin columns) with
Clear All / Set All and auto-cascade (write implies read, admin implies operator)
- Provisioning has its own >> popup dialog
- Removed live mode restrictions for add/edit/delete user operations
- Broadened type detection and added safe int conversion for live mode values
- Double-click on tree node or canvas box opens special view (User Manager for
UserService, Properties for other components)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New user_service_view.py with table of sys::User children, add/edit/delete
dialogs, SHA-1 credential hashing, 32-bit permission bitmask (4 groups x 7
flags), 8-bit provisioning byte, and undo support. Wired into main.py with
context menu entry, panel management, history navigation, and live-mode DOM
resolution for correct display on connected devices.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Populate prop elements with manifest default values when adding
components in both offline and live mode
- Send config values from manifest in SOX add command for live devices
- Refresh button in properties panel now fetches fresh values from
the connected device before re-reading the DOM
- Properties panel fetches device values on open in live mode
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Fix add component from palette in live mode: resolve <app> element
as comp_id 0, fix type_id lookup to use type_name_map, set type_name
on newly added SoxComponent, sync device values into DOM after add,
write meta position back to device, and subscribe new component to COV.
Fix delete component in live mode: clean up subscriptions for deleted
component and all its descendants.
Add tree root context menu with device app actions (save, hibernate,
quit, restart, reboot) in live mode. Device save clears dirty state.
Clean up connection lost handling to do a full disconnect.
Fix slot registry to copy base slots and renumber IDs correctly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Discover dialog shows a device list with Port, Wait Time fields and a
Discover button. Selecting a device and clicking Connect (or double-
clicking) opens a credentials prompt for username/password, then
connects. The Connect dialog is reverted to its original simple form.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
In live mode the DOM is rebuilt from the device when switching sheets,
creating new element objects. The pending link from the old tree could
not be found by identity in canvas_link_map. Re-resolve it by from/to
attributes after the rebuild so the selection matches.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
_slot_name_by_id() now resolves SOX link slot IDs against the
inheritance-flattened final_components_registry instead of the
per-type slot_registry whose local IDs were wrong for types with
intermediate parents (e.g. RegFloat→Register→Component). This
produced incorrect link endpoints, inflated linked-slot visibility,
and different box sizes between file and live modes.
Also: tighten routing constants for denser wiring, add wiresheet
PNG print/export (Ctrl+P), sort link routing jobs by gap distance,
remove debug route logging, and fix live tree-expand re-selection.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Opening a file while connected to a device prompts to disconnect first.
Connecting to a device while a file is open prompts to save unsaved
changes, then closes the file before showing the connect dialog.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Add type_name_map on SoxClient so components loaded after connect
resolve proper names (e.g. control::And2) instead of kit::typeN.
This lets the slot registry and final_components_registry match,
so component boxes show their slots and property values.
- Load live schema gracefully: skip missing kit manifests instead of
aborting, compile the kits we have, and warn about missing ones in
the status bar.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
_on_tree_open used tree.selection() which may differ from the opened
node; switched to tree.focus(). Network calls in _live_tree_expand now
run in a daemon thread so the UI stays responsive during lazy loading.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
After open_wiresheet rebuilds the DOM and tree, re-find the target
element by its comp id (not the old tree item ID which no longer
exists) and re-select it with the restoring flag to prevent recursion.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Use RLock instead of Lock for _close_lock so close() can call
_shutdown() without deadlocking — previously the session never
marked itself closed, causing infinite keepalive sends.
Mask kit checksums to unsigned 32-bit for hex display so negative
i4 values render as proper 8-digit hex (e.g. d3984c51 not -2c67b3af).
Tested against live device at 192.168.1.251 — full handshake,
schema read, and component tree load confirmed working.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New checkbox in Preferences (default off). When enabled, every DASP
send (>>>) and receive (<<<) prints message type, seq/ack numbers,
payload size, and remote address to stdout.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Guard tree.get_children() with tree.exists() so a stale item ID from
a COV or lazy-load rebuild does not raise TclError.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Port the DASP transport and Sox protocol stack from sedonaOntrol Java
to Python, enabling live device editing alongside the existing offline
SAX editor. Lazy-loads components on navigation, caches them, and
subscribes to COV events for the active wiresheet.
New files: dasp.py, sox.py, device_session.py, connect_dialog.py,
live_hooks.py. Modified: app_state.py (live-mode state), main.py
(Device menu, COV polling, lazy tree expand), properties.py (Sox
write-through), sax_file.py (structural mutations route through
live_hooks), schema.py (find_manifest helper).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
When a SAX file is opened and any declared kit is missing a checksum,
the Kit Manager panel opens automatically and the palette stays empty
until the checksums are resolved.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
The sidebar palette combo now lists kits from the open file's schema
rather than every kit installed in Sedona home, with their resolved
version labels. Falls back to all installed kits when no file is open.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Manage Kits now opens inside the editor pane (like Properties and Link
View) instead of a separate Toplevel window. Also normalize hex
checksums by stripping leading zeros so .kit and manifest filenames
that disagree on padding (e.g. 462d43e vs 0462d43e) still resolve to
a version.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Opening a Properties or Link view was invisible to the history, so Back
from one did two things at once: it took the panel down and stepped to the
sheet before the one it was opened over. There was no way back to a
picture you had just been reading.
A history entry is now a (kind, element) pair naming what the editor pane
held -- a sheet, a Properties view, or a Link View -- and restoring one
puts that back: a sheet entry selects its tree node, a panel entry
re-opens the panel. So opening a panel is a move like opening a sheet.
Back from a Properties view lands on whatever came before it and Forward
brings the panel back, and following a link out of the Link View now has a
way home: Back returns to the picture the link was followed from, and a
second Back to the sheet that was open before that.
The panel's own Close is deliberately not recorded. It means "leave this
view", and recording it would put a sheet entry after the panel's, so Back
would re-open the panel that had just been closed. Leaving the position
alone means Back steps to what came before the panel and Forward re-opens
it, which is what the arrows are for.
Both arrows still go through close_editor_panel first, so unsaved
Properties edits are asked about exactly as before and a refusal leaves
the view and the position where they were. Pruning now has two kinds of
entry to check -- a sheet needs a tree node, a panel needs its component
still in the document -- and collapses any pair it leaves naming the same
view, since a Back that visibly does nothing is worse than a shorter
trail.
sheet_history and its functions are renamed for what they now hold.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Right-clicking a component now offers Link View alongside Properties, from
the wiresheet and from the navigation tree alike. It takes over the editor
pane the same way and answers one question -- what is wired to this
component, and where does it go.
The chosen component sits in the middle wearing the stroke a selected box
wears on the sheet, with what links into it on the left and what it links
out to on the right, so every arrow points the way the signal travels.
Pale yellow ground and no grid: nothing here can be positioned, because
the layout is derived from the links every time it is drawn and no part of
it is stored in the file. Read-only throughout -- no drag, no add, no
delete -- so a component's wiring can be read without the risk of
rearranging it.
Every line is grey, since this is not a wiresheet and a wire-blue line
would invite the reader to treat it as one. A link on the same sheet is
solid; one that crosses is dashed, keeps the grey knob that sheet paints
on the slot, and has the far component drawn in with its sheet named
beneath it. A reference the document cannot resolve gets a placeholder
naming the path, because a link the view silently dropped would be the one
thing a reader could not find out from here.
Clicking a wire or a component follows the link: it opens the sheet of the
end that is not the component the view is about, with the link selected in
red. A link that stays on one sheet therefore goes back to that sheet
where both ends are drawn, and one that crosses opens the other sheet --
the end the view could only show as a knob.
Supporting changes:
- draw_component_box is factored out of render_components, so the sheet
and this view paint a component with the same code and a box cannot read
differently between them. draw_knob takes its canvas for the same
reason.
- The editor pane's hand-over is now shared: _take_editor_pane,
_give_editor_pane_back and close_editor_panel replace the
Properties-only versions, so "you have not saved that" is still asked
once, in one place, whichever panel has the pane.
- Fixes the jump to a link's other sheet, which arrived with the link not
selected. An after_idle callback is not late enough -- ttk dispatches
its own selection event later than one of those, so the repaint wiped
the selection. The link is left in _pending_link_selection for
on_tree_select to honour once it has painted.
- Each gap is sized to hold a lane per wire crossing it, and lanes are
handed out nearest-target-first, so a fan of a dozen links nests instead
of crowding a dozen verticals into a 30px band.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Right-click a component on the wiresheet or in the tree and Properties takes
over the editor pane, listing every slot the manifest declares rather than the
handful a box paints. Config slots that are not @readonly are white and
editable; everything else is grey.
Rows are built from the slot's facets, read against SedonaDoc/niagara.html:
@trueText/@falseText, @range, @precision, @unit, and @min/@max, which bound
what Save accepts. Three facets it had wrong:
- null is a value, not an absence. control::WriteFloat pairs 'in' with a
setNull action and the sample app stores val="null" on four of them, so
null now shows, parses back, and reads as @nullText where declared.
- @min/@max on a Buf count characters. TcpDevice.ipAddr is a Buf(17) with
@max 16; a longer string is refused rather than overrunning the device.
- an int's implicit range is noise. [-2147483648 - 2147483647] said no more
than "a whole number", so only byte and short print a range they did not
declare.
meta gets a row of its own: the '>>' opens its user groups as checkboxes and
its position as x and y, since typing 822411269 into a field sets neither.
Save writes only the rows that moved, as one undoable SlotValueCommand, and
refuses the lot if any row fails its range check. An edited field paints the
view in the canvas's own dirty tint, and every way of leaving asks before
discarding.
The file name on the tree's root row goes red while anything is unwritten,
counting both a dirty document and unsaved fields. Two things this needed:
the nav tree runs on its own style, because a themed Treeview's selected
foreground beats a row tag's; and the tag is added to or removed from the row
rather than recoloured, because reconfiguring a tag does not repaint rows that
are already drawn.
Also fixes a latent hazard the panel exposed: Del and Backspace are bound
application-wide, so they now stand down while a text field has focus rather
than deleting the component behind it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Right-clicking a component in the navigation tree offered Delete Component
alone, while the same component on the wiresheet also offered Link Mark and
Link From / Link To. Which list a component was picked from should not change
what can be done with it, so both popups are now built by
fill_component_popup.
Its entries close over the component instead of reading a selection back,
which is what lets each popup act on the row or box that was actually clicked
-- the canvas commands went through app_state.selected_canvas_tag, which a
tree row never sets. do_link_mark, do_link_from_mark, do_link_to_mark and
delete_tree_selected_component fall out with it, and Link Mark now says in the
status bar what it marked, since nothing else on screen shows that.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Right-clicking a wire or a knob now offers Go to Link Wire Sheet "<name>",
naming the sheet the far end is on -- the end a grey knob stands in for. A link
with both ends on the open sheet has nowhere to go, so the entry is left off
rather than greyed out.
find_component_by_path turns a link's from/to reference back into the component
it points at, the inverse of get_component_path, and the sheet is that
component's parent; a parent of <app> is the file's root node, which the popup
names after the file.
Arriving selects the same link and scrolls it to the middle of the view. It is
found by its element rather than by the tag it was picked on, since a repaint
hands out fresh wire tags, and it waits for that repaint from an after_idle
callback: ttk queues its selection event rather than dispatching it, so the
sheet is not painted when the tree node is selected -- and painting a sheet
clears the selected link, which was wiping the selection this feature had just
made. The jump is an ordinary sheet opening, so Back returns to where the link
was picked.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Fits the whole painted sheet in the visible canvas and scrolls it into view,
from the View menu, Ctrl/Cmd+9, or the four-corners button after the zoom
percentage. The ladder gains 25% and 33% at the bottom, so a wide sheet has
somewhere to fit into.
Fit is the one scale that is not on the ladder -- a sheet fits at whatever
scale it fits at -- so zoom_step now takes the first level above or below the
scale in force rather than the neighbour of the nearest rung.
The sheet is measured from item coordinates rather than canvas.bbox(), which
is inflated by the outline stroke: a stroke is the same two pixels at every
zoom, so a bbox divided back to 1:1 reports a slightly smaller sheet the
further in it is zoomed, and fitting an already fitted sheet crept from 288%
to 291% instead of standing still. Anything painted left of or above the
canvas origin is measured from the origin, since no amount of scrolling brings
it into view.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A ladder of scales from 50% to 300%, stepped by Zoom In / Zoom Out / Zoom 100%,
by the two buttons beside the navigation arrows, and by Ctrl and the wheel,
which holds the point under the pointer still. A menu or keyboard zoom holds
the middle of the view instead, so it closes in on what is already being
looked at.
Painting and routing stay at 1:1, because that is where every metric is tuned:
box header and row heights, wire stubs, lane gaps, standoffs, knob radii. Zoom
scales the finished picture, so a zoomed sheet keeps the proportions of a 1:1
one and the router reaches the same decisions at every scale. Text comes along
because the three box fonts are resized once the boxes have been measured with
them.
redraw_links replaces the direct draw_links calls a drag or a drop makes: the
router reads box positions off the canvas, so the boxes go back to 1:1 for the
routing pass and the result is scaled again. Canvas coordinates carry the zoom,
which is why the drag, release and drop handlers now snap against
meta_scale * zoom -- a box dragged the same distance across the screen lands on
the same meta step at 50%, 100% and 200%.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Cmd+W closes the window on macOS, so the Command half of the pair is left
alone; this is the one shortcut that is not bound on both modifiers.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Joins the Command/Control shortcut pairs, so the chord works the same on
either platform, and the View menu entry now shows it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
It re-flows what is on screen rather than editing the document, which is where
the rest of the sheet's presentation controls now live.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tree / Palette hides the left column so the wiresheet has the whole window.
ttk has no hide flag for a pane, so the column is dropped from the paned
window and re-inserted at the front, which is why the configured width is
re-applied afterwards.
Back and Forward walk the sheets opened this session, with two arrow buttons
in a new toolbar on the same commands. History entries hold the element whose
children are painted rather than a tree item id: rebuilding the tree hands out
fresh ids, while the elements themselves survive. Recording runs from the tree
selection handler, the one route every sheet opening takes, and is suppressed
while a walk drives that selection so it cannot rewrite its own trail. Opening
a different file retires the history; a delete or an undo drops only the
entries whose element has left the document, keeping the position on screen.
open_file builds the tree inline instead of going through
refresh_treeview_from_dom, so it never raised the tree-filled callback and the
history had no way to see a new file. It and reset_to_startup_state now fire
it, which also gets the tree column fitted on load rather than on the first
resize.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The tree and palette column took a share of every extra pixel the window
gained. It is now pinned to a width set in Preferences, defaulting to
230 px, so widening the window only ever feeds the wiresheet.
That fixed width brought two existing weaknesses into view:
- Long paths and type names had nowhere to go. Both lists now size their
tree column to the widest visible row - ttk derives the horizontal
scroll range from the column width, so a column left stretching can
never scroll - and carry vertical and horizontal scrollbars that leave
the grid when they have nothing to scroll.
- A short window squeezed the navigation tree away entirely. Both lists
asked for ten rows, so the palette requested the most while the tree,
carrying the larger weight, gave up its height first. The requested
rows are now 6 and 5, a 300 px minimum window height keeps the
shortfall shallow, and clamp_left_pane_split holds a dragged sash
between the two floors.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ArdaandClaude Opus 5.5